Konica Minolta bizhub Pro 920 User Manual page 698

18
8
Specify the Trans IPX Setting.
Touch [Trans IPX Setting] on the SNMP Trap Setting Screen to display
the SNMP Trap Trans IPX Setting Screen.
Specify the following items, using up/down arrow as required.
Touch [OK] to complete the settings.
– IPX SNMP Trap Transmission
– Trans IPX Network Address
– Trans IPX Node Address
– Trans IPX Community Name
– Report Items: Select the desired report items. More than one item
can be selected.
Touch [Clear All] if none of them are required. However, the authen-
tication failure transmission will be performed even if all report
items are cleared.
18-178
Utility <Administrator Setting>
bizhub PRO 920