Finishing / Paper Fold
To Stop Scanning/Printing
To cancel the tandem copying job
1
Press [Stop] on the control panel of the master machine.
The scanning/printing job stops immediately, and the popup menu ap-
pears on the Basic Screen of the master machine to ask you whether
to continue or terminate the job. At this time, the tandem mode is not
yet released.
2
Touch [Stop Job] to delete all the scanned data and to release the tan-
dem mode.
However, if the data transmission has already been completed, the tan-
dem job on the tandem machine has to be cancelled separately. Touch
[Job List] on the touch panel of the tandem machine to display the Job
List Screen, then delete the tandem job.
To stop the job cancelling procedure, touch [Continue] on the popup
menu.
bizhub PRO 920
12
12-39