Konica Minolta bizhub Pro 920 User Manual page 252

11
– On the screen, the [Set 01] key is active to be ready for the first in-
sertion type setting. Select the desired mode (Print/Blank), copy
mode (Simplex/Duplex), and tray paper to be used.
To enter the page number, touch [Page Setting] to display the pop-
up screen keypad. Enter the page number of insertion location, us-
ing ", (comma)" between pages or "- (hyphen)" for consecutive
pages. Up to 20 digits (including comma and hyphen) can be en-
tered for one operation.
For example, if page 4 is entered in blank mode, a blank sheet will
be inserted between page 4 and page 5; in print mode, a printed
sheet is inserted at page 4.
? Do you want to delete the last entered number?
% Touch [Del].
Do you want to clear all the page entry?
?
% Touch [Clear].
Do you want to complete the page entry?
?
% Touch [Fix]. The Set 01 setting is fixed and the [Set 02] key will be
active.
? Do you want to change the insertion type?
% To change the insertion type, set the new one and enter the page
number. Up to 30 insertion type settings can be stored.
If the same page number has been entered in Set 02 and Set 03 for
example, the setting of larger number (Set 03) will take priority.
9
When all settings are completed, touch [OK] repeatedly till the Applica-
tion Screen is restored.
10
Enter the desired print quantity, position originals in the document
feeder, then press [Start].
11-14
Applications
bizhub PRO 920