Konica Minolta bizhub Pro 920 User Manual page 478

17
5
Touch to highlight the desired tray key under ATS/APS Switch.
The selected tray is automatically detected when ATS functions. The
trays not selected will not be detected even when ATS functions.
The selected tray will be displayed under Tray Priority as the tray key.
6
Touch to highlight the desired tray key under Tray Priority, then change
its priority by using [Up] and [Down].
7
Touch [OK] to complete the setting and return to the Feed Tray Setting
Screen.
8
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
17-26
Utility <User Setting>
bizhub PRO 920