Mazda 6 Training Manual page 342

Operation switch
15.0 (18.0)
Temperatur
15.5—28.5
e setting
(18.5—
*1
31.5)
dial
29.0 (32.0)
( ) : GCC specs.
*1
: Setting temperature fluctuates up or down in increments of 0.5, within the range of 15.0 to 29.0 (European
(L.H.D. U.K.) specs.) or 18.0 to 32.0 (GCC specs.). When the fan is OFF, the setting temperature can be
adjusted in the range of ±1.0.
*2
: If operated when in defroster correction, it returns to the condition prior to defroster operation.
*3
: Ambient temperature correction takes precedence. If operated when in defroster correction, it returns to the
condition prior to defroster operation. However, if it is off prior to defroster operation, it switches to automatic
control.
*4
: Ambient temperature correction takes precedence. When the fan is OFF, the A/C is fied at off.
End Of Sie
AIRFLOW TEMPERATURE CONTROL
• Airflow temperature is controlled by the air mi actuator so that the passenger compartment temperature
remains at the target temperature (control computation value T1).
• Control computation value T1 is the target temperature in the cabin set by the climate control unit based on
differences among set temperature, input temperature from the sensors, and sunlight intensity.
.
1 Set temperature
2 Sunlight intensity
3 Ambient temperature
4 Evaporator temperature
5 Cabin temperature
6 Airflow mode
7 Air intake mode
8 A/C compressor control condition
CONTROL SYSTEM
Airflow mode control
Control before switched
Automatic Manual
control control
AUTO No change
Air intake control
Control before switched
Automatic Manual
control control
AUTO No change
9 Signals
10 Climate control unit
11 Output
12 Feedback
13 Air mi actuator
14 Operation
15 Air mi doors
16 Airflow temperature changes
A/C compressor control
Control before switched
Automatic Manual
control control
AUTO No change
A6E854001044T04
A6E8540T041
U–23
U