Controller Area Network (Can - Mazda 6 Training Manual

.
1 Normal brake mode
2 Brake assist reduction mode
3 Master cylinder
4 Stability control solenoid valve
5 Pressure-retention solenoid valve

CONTROLLER AREA NETWORK (CAN)

End Of Sie
• ABS (ABS/TCS) or DSC HU/CM transmit/received the information through the CAN. For detail information of
the CAN, see the “CONTROLLER AREA NETWORK.” (See
Transmit Information
• Travelled distance
• Wheel Speed
— Front Left
— Front right
— Rear left
— Rear right
• Brake system status
• Torque reduction request
• Brake system configuration
Received Information
• Engine conditions from PCM
• Engine speed from PCM
• Transmission/ale type from PCM
• Tire circumference from PCM
• Gear/change lever position from PCM
• Brake system warning light condition (brake fluid level) from instrument cluster
• ABS configuration from instrument cluster
End Of Sie
DYNAMIC STABILITY CONTROL
6 Pressure-reduction solenoid valve
7 Pump motor
8 Traction switch solenoid valve
9 Pump
10 caliper piston
T–5 OUTLINE.)
A6E6920T015
P
A6E692067650T17
P–17