Cruise Control System - Mazda 6 Training Manual

OUTLINE
• The cruise control system allows the driver to maintain selected vehicle speed without operating the
accelerator when driving on an open highway.
• The cruise actuator controls the throttle valve to maintain vehicle speed.
• The construction and operation of cruise control system is essentially carried over from that of the 626 (GF)
model, ecept for the following:
Comparison with 626 (GF) model
Item
Cruise actuator
Actuator cable
Cruise control switch
Vehicle speed signal input
Cruise set indicator light
Instrument cluster
Cruise main indicator light
Clutch switch (MTX)
TR switch (ATX)
Brake switch
End Of Sie
STRUCTURAL VIEW
.
1 Cruise actuator
2 Actuator cable
3 TR switch (ATX)
4 Cruise main indicator light
5 Cruise set indicator light
6 Clutch switch (MTX)

CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM
• Cruise actuator with built-in control module has been adopted
• Motor-type system has been adopted
• Tap up/tap down function has been added
• Vehicle speed at which cruise control setting is available has been
changed
Actuator cable with adjuster has been adopted
Embedded type (in steering wheel) has been adopted
ABS (ABS/TCS) HU/CM (with ABS (ABS/TCS))
DSC HU/CM (with DSC)
LED has been adopted
Same as the 626 (GF) model
Comparison
7 Brake switch
8 Cruise control switch
9 PCM
10 ABS (ABS/TCS) HU/CM (with ABS (ABS/TCS))
DSC HU/CM (with DSC)
A6E812801011T01
A6E812801011T02
T T
A6E8128T001
T–83