Remote Control And Cradle - Mazda 6 Training Manual

REMOTE CONTROL AND CRADLE

Outline
• A remote control for the car-navigation system, with simplified design for easy operation, has been adopted.
• A cradle to hold the remote control has been adopted.
Structure
• The remote control and cradle are located on the console.
• The buttons and joystick for controlling car-navigation are located on the top side of the remote control. The
infrared transmitter sends signals through a terminal on the front and back of the remote control.
• An infrared sensor that receives signals from the remote control is located on the cradle. The received signals
are sent to the LCD unit.
• The remote control uses the batteries as a power source when not in the cradle and uses the power supply
connector when set in the cradle. (Ignition switch at ACC or ON position)
Note
• The batteries are not charged when the remote control is in the cradle.
.
1 Remote control
2 Cradle
3 Front view
4 Top view
No. Button (component)
9 [POS (Position)] button
10 Joystick
11 [ENTER] button
12 [ZOOM] button
13 [RET] button
14 [MENU] button
15 [VOICE] button
End Of Sie
T–70
AUDIO AND NAVIGATION SYSTEM
Displays the current position.
Selects items by tilting it up, down, right and left.
Eecutes a selected item.
Changes the map scale.
Returns to the previous screen.
Select a menu.
Initiates vocal guidance for route maneuvers.
5 Underside view
6 Infrared transmitter
7 Infrared sensor
8 Power supply connector
Function
A6E812400174T01
A6E8126T061