Cruise Actuator - Mazda 6 Training Manual

CRUISE ACTUATOR

• A cruise actuator with a built-in control module has been adopted. With the integration of the cruise actuator
and control module, component structure has been simplified and serviceability has been improved.
• A motor-type system has been adopted for the operating structure of the actuator cable. In comparison to the
previous vacuum-type system, system control is more eact and smooth.
• Operation of the cruise control system is basically the same as that of the 626 (GF) model, ecept for the
following:
— Tap up/tap down function
— Cancel condition of cruise control system
— Vehicle speed at which cruise control setting is available: 30 km/h {18.6 mph} or more
.
1 Cruise actuator
2 Control module
Tap Up/Tap Down Function
• When the vehicle is driving at a constant speed sat by the cruise control system, and a signal from either the
SET/COAST or RESUME/ACCEL switch is sent to the control module (in cruise actuator) for a very short
period (a one-touch control function), the control module increases or decreases the vehicle speed by 1.6 km/h
{1.0 mph}.
Cancel Condition of Cruise Control System
• When the vehicle speed becomes less than 22.5 km/h {14.0 mph}, the cruise control system operation is
canceled, however the speed sat in the memory is not cleared.
End Of Sie
CRUISE CONTROL SYSTEM
3
4
Plate
Actuator cable
A6E812801011T04
A6E8128T003
T T
T–85