Removing The Pickup Solenoid; Preparation; Procedure - Canon L100 Service Manual

4
Disassembly/Assembly > Pickup Feed System > Removing the Pickup Solenoid > Procedure

Removing the Pickup Solenoid

■ Preparation

1) Remove the Left Cover (Refer to page 4-27).
2) Remove the ADF Unit (Refer to page 4-54).
3) Remove the Right Cover (Refer to page 4-28).
4) Remove the Front Cover Unit (Refer to page 4-29).
5) Remove the Upper Cover (Refer to page 4-30).
6) Remove the Rear Cover (Refer to page 4-29).
7) Remove the Speaker (Refer to page 4-51).
8) Remove the Main Controller PCB (Refer to page 4-39).
9) Remove the Communication PCB Unit (Refer to page 4-44).

■ Procedure

1) Remove the Main Controller PCB Installation Plate [1].
• 2 Screws (with plain washer) [2]
• 2 Screws (black TP) [3]
• 1 Hook [4]
[1]
x4
[4]
[3]
4 Disassembly/Assembly > Pickup Feed System > Removing the Pickup Solenoid > Procedure
2) Disconnect the terminal [1], and free the Transfer High Voltage Harness [2] from the
Harness Guide [A].
3) Remove the Harness Retaining Spring [3] from the 2 hooks [B].
[2]
4) Disconnect the 4 connectors [1].
[2]
F-4-207
[B]
[B]
[1]
[A]
[1]
x4
[1]
F-4-209
4-91
[3]
F-4-208
4-91