Removing The Adf Unit; Preparation; Procedure - Canon L100 Service Manual

4
Disassembly/Assembly > Original Exposure System > Removing the ADF Unit > Procedure

Removing the ADF Unit

■ Preparation

1) Remove the Left Cover (Refer to page 4-27).

■ Procedure

NOTE:
Between L100/L170/L174/L250/L150 CHN/L150 KOR/L154 model and L150 EUR/L150
AUS model, the number of connectors to be disconnected differs.
• For L100/L170/L174/L250/L150 CHN/L150 KOR/L154 model, refer to steps 2-1, 3-1, 4-1,
and 5-1.
• For L150 EUR/L150 AUS model, refer to steps 2-2, 3-2, 4-2, and 5-2.
1) Free the Ferrite Core [1] from the Wire Saddle [2].
<For L100/L170/L174/L250/L150 CHN/L150 KOR/L154 model>
2-1) Disconnect the terminal [1] of the Grounding Wire.
• 1 Screw (black TP) [2]
3-1) Disconnect the 4 connectors [3] and Flat Cable [4].
4-1) Remove the Ferrite Core [5] from the guide.
5-1) Free the disconnected Grounding Wire [1], 4 harnesses [3], and Flat Cable [4] from the
Harness Guide [A].
4 Disassembly/Assembly > Original Exposure System > Removing the ADF Unit > Procedure
[5]
x5
[4]
<For L150 EUR/L150 AUS model>
2-2) Disconnect the terminal [1] of the Grounding Wire.
• 1 Screw (black TP) [2]
3-2) Disconnect the 3 connectors [3] and Flat Cable [4].
4-2) Remove the Ferrite Core [5] from the guide.
5-2) Free the disconnected Grounding Wire [1], 3 harnesses [3], and Flat Cable [4] from the
[1]
Harness Guide [A].
[2]
x4
F-4-102
[4]
[1]
[2]
[4]
[3]
[3]
[3] [1] [3]
[5]
[1]
[2]
[4]
[3]
[3] [1]
4-54
[A]
F-4-103
[A]
[3]
F-4-104
4-54