Removing The Adf Upper Unit And Adf Lower Unit (L150 Eur/L150 Aus); Preparation; Procedure - Canon L100 Service Manual

4
Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit and ADF Lower Unit (L150 EUR/L150 AUS) > Procedure
Removing the ADF Upper Unit and ADF Lower Unit
(L150 EUR/L150 AUS)

■ Preparation

1) Remove the Left Cover (Refer to page 4-27).
2) Remove the ADF Left Cover (Refer to page 4-23).
3) Remove the ADF Left Upper Cover (L150 EUR/L150 AUS) (Refer to page 4-26).
4) Remove the ADF Right Cover (Refer to page 4-23).
5) Remove the Document Feed Tray (Refer to page 4-61).

■ Procedure

NOTE:
When removing the CIS Unit, ADF Pickup Roller and ADF Feed Roller, refer to steps 1
to 6.
1) Remove the ADF Harness Guide [1].
• 1 Claw [2]
• 2 Hooks [3]
[1]
4 Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit and ADF Lower Unit (L150 EUR/L150 AUS) > Procedure
[3]
[2]
2) Remove the 2 screws [1] of the ADF Upper Unit and ADF Lower Unit.
3) Open the ADF Unit, remove the Arm Shaft [1], and remove the ADF Harness Cover [2]
while holding the ADF Unit.
• 1 Claw [3]
• 1 Hook [4]
CAUTION:
Be careful not to tip over the ADF Unit.
[3]
F-4-136
[1]
x2
4-65
F-4-137
F-4-138
4-65