Canon L100 Service Manual page 117

4
Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit and ADF Lower Unit (L100/L170/L174/L250/L150 CHN/L150 KOR/L154) > Procedure
CAUTION:
Be careful not to tip over the ADF Unit.
CAUTION:
Be careful not to get fingers caught under the arm [1] of the ADF Unit when assembling.
4 Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit and ADF Lower Unit (L100/L170/L174/L250/L150 CHN/L150 KOR/L154) > Procedure
F-4-129
4) Remove the 3 screws [1] of the ADF Upper Unit and ADF Lower Unit.
[1]
F-4-130
NOTE:
Be sure to insert the Arm Shaft [1] into the holder groove [A] while holding the ADF Unit,
and pull it in the direction of the arrow to install the arm when assembling.
[1]
[A]
x3
4-63
F-4-131
[1]
F-4-132
4-63