4) Remove the cassette paper presence/absence sensor [1].
- Connector [2], 1 pc.
7.5.7 Cassette Pickup Solenoid
7.5.7.1 Removing the Cassette Pickup Solenoid
1) Detach the lower-left cover.
2) Detach the cassette rear cover.
3) Remove the cassette pickup.
4) Remove the cassette pickup solenoid [1].
- Harness [2], 1 pc.
- Wire saddles [3], 2 pcs.
- Screw [4], 1 pc.
[2]
[3]
7.5.8 Manual Pickup Roller
7.5.8.1 Removing the Multifeeder Pickup Roller
1) Open the front cover.
2) Turn the developer pressure release lever clockwise, and then open the left
door.
3) Draw out the drum unit.
4) Remove the transfer registration unit [1].
- Screw [2], 4 pcs.
[1]
[2]
[1]
F-7-28
[4]
[1]
F-7-29
[2]
[2]
F-7-30
5) Remove the feed guide [1].
- Screw [2], 2 pcs.
6) Remove the multi-paper roller [1].
- Bearing [1], 1 pc.
0017-8571
When installing the multifeeder pickup roller, pay attention to the
orientation.
Left-side axis: [1] Long Right-side axis: Short [2]
0017-8572
7.5.9 Manual Feed Tray paper sensor
7.5.9.1 Removing the Multifeeder Paper Presence/
Absence Sensor
1) Open the front cover.
2) Turn the developer pressure release lever clockwise, and then open the left
door.
3) Draw out the drum unit.
[1]
[2]
F-7-31
[1]
[2]
F-7-32
[1]
[2]
Chapter 7
0017-8579
7-13