Removing The Adf Upper Unit (L100/L170/L174/L250/L150 Chn/L150 Kor/L154); Preparation; Procedure - Canon L100 Service Manual

4
Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit (L100/L170/L174/L250/L150 CHN/L150 KOR/L154) > Procedure
7) Remove the ADF Unit [1].
• 2 Shafts [2]
CAUTION:
• Be careful not to damage the Flat Cable and harnesses with [A] part when
disassembling/assembling.
• Be sure to put the Flat Cable and harness through the [A] part before installing the
ADF Unit when assembling.
4 Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit (L100/L170/L174/L250/L150 CHN/L150 KOR/L154) > Procedure
[A]
F-4-108
[1]
[2]
F-4-109
Removing the ADF Upper Unit
(L100/L170/L174/L250/L150 CHN/L150 KOR/L154)

■ Preparation

1) Remove the Left Cover (Refer to page 4-27).
2) Remove the ADF Left Cover (Refer to page 4-23).
3) Remove the Handset Base Unit
(L100/L170/L174/L250/L150 CHN/L150 KOR/L154) (Refer to page 4-24).

■ Procedure

NOTE:
When removing the ADF Delivery Roller, refer to steps 1 to 6.
1) Disconnect the terminal [1] of the Grounding Wire.
• 1 Screw [2]
2) Remove the ADF Harness Guide [3].
• 1 Claw [4]
• 2 Hooks [5]
[2]
[3]
[5]
[1]
[4]
4-56
[5]
F-4-110
4-56