Fixing System; Layout Drawing; Removing The Fixing Assembly; Preparation - Canon L100 Service Manual

4
Disassembly/Assembly > Fixing System > Removing the Fixing Assembly > Procedure

Fixing System

Layout Drawing

[4]
[3]
[2]
No. Name Main Unit
[1] Fixing Assembly Main Unit
[2] Temperature Fuse Fixing Assembly
[3] Fixing Heater Fixing Assembly
[4] Thermistor Fixing Assembly
4 Disassembly/Assembly > Fixing System > Removing the Fixing Assembly > Procedure
[1]
Reference Adjastment during
parts replacement
(Refer to page -
4-81)
- -
- -
- -
T-4-33

Removing the Fixing Assembly

■ Preparation

1) Remove the Left Cover (Refer to page 4-27).
2) Remove the ADF Unit (Refer to page 4-54).
3) Remove the Right Cover (Refer to page 4-28).
4) Remove the Front Cover Unit (Refer to page 4-29).
5) Remove the Upper Cover (Refer to page 4-30).
6) Remove the Rear Cover (Refer to page 4-29).
7) Remove the Speaker (Refer to page 4-51).
8) Remove the Main Controller PCB (Refer to page 4-39).
9) Remove the Communication PCB Unit (Refer to page 4-44).

■ Procedure

CAUTION:
• Be sure to perform the operation after the Fixing Assembly is surely cooled because
the assembly is hot right after printing.
• Do not disassemble the Fixing Assembly in the field because it needs adjustment.
1) Remove the Main Controller PCB Installation Plate [1].
• 2 Screws (with plain washer) [2]
• 2 Screws (black TP) [3]
• 1 Hook [4]
[1]
x4
[4]
[3]
4-81
[2]
F-4-178
4-81