Administrative State: Disabled - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000
RX Mode
Authentication
Password for
Authentication
Distribute List In
Total Entries
Switch#show ip rip interface vrf VPN-A
RIP Interface Settings
Interface Name: ip100
Interface Metric: 1
TX Mode: V1 Broadcast
Authentication: Disabled
Total Entries : 1
Switch#
CLI Reference Guide
The version of receiving RIP packets on the interface. The value is V1 Only, V2
Only, V1 or V2, or Disabled.
The authentication state. The value is Disabled or Enabled.
The value of password.
Access list name used to distribute-list in.
The total value of interfaces.
To check settings of all RIP interfaces in VRF VPN-A:
IP Address: 100.1.1.1/24 (Link Up)

Administrative State: Disabled

RX Mode: V1 or V2
show ip rip interface
433