Show Ip Ospf Interface - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

11-27 show ip ospf interface

show ip ospf interface [IPIF_NAME] [vrf VRF-NAME]
Syntax Description
IPIF_NAME
vrf VRF-NAME
Default
Command Mode
Usage Guideline
Example
Switch# show ip ospf interface
Interface Name: System
Network Medium Type: BROADCAST
Area ID: 0.0.0.0
Priority: 1
DR Address: 10.1.1.2
Hello Interval: 10
Transmit Delay: 1
Authentication: None
Passive Mode: Disabled
Interface Name: ip100
Network Medium Type: BROADCAST
Area ID: 0.0.0.0
Priority: 1
DR Address: None
Hello Interval: 10
Transmit Delay: 1
Authentication: None
Passive Mode: Disabled
CLI Reference Guide
Use this command to display interface information for OSPF.
(Optional) Specifies the interface name to display the OSPF information.
(Optional) Specifies to show interface information about OSPF VRF instance.
None.
Privileged mode.
Use this command to check OSPF interface settings.
To show information of all OSPF interfaces:
To show information of System interfaces:
IP Address: 10.1.1.1/24 (Link Up)
Metric: 1
Administrative State: Enabled
DR State: BDR
Backup DR Address: 10.1.1.1
Dead Interval: 40
Retransmit Time: 5
IP Address: 192.168.100.1/24 (Link Down)
Metric: 1
Administrative State: Disabled
DR State: DOWN
Backup DR Address: None
Dead Interval: 40
Retransmit Time: 5
show ip ospf interface
358