Show Ip Ospf Virtual-Neighbor - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

11-30 show ip ospf virtual-neighbor

show ip ospf virtual-neighbor [AREA-ID NEIGHBOR-ID] [vrf VRF-NAME]
Syntax Description
AREA-ID
NEIGHBOR-ID
vrf VRF-NAME
N/A
Default
Command Mode
Usage Guideline
Example
Switch# show ip ospf virtual-neighbor
Virtual Interface Configuration
Transit
Area ID
--------------- ---------------- ---------------- ----------------
1.1.1.1
Total Entries : 1
Switch#
Field
Transit Area ID
Router ID of Virtual Neighbor
Router
IP Address of Virtual Neighbor
Virtual Neighbor State
CLI Reference Guide
Use this command to show information on OSPF neighbors built on virtual link.
(Optional) Specifies the area ID which the virtual neighbor belongs to.
(Optional) Specifies the router ID of virtual neighbor.
(Optional) Specifies to show virtual neighbor information about OSPF VRF
instance.
Display brief information about all OSPF virtual neighbors.
None.
Privileged Mode.
Use this command to show information of the OSPF neighbor on virtual link. If
the AREA-ID and NEIGHBOR-ID is specified, only the virtual neighbor with the
same area ID and neighbor ID will be displayed.
To show information about virtual neighbor:
Router ID of
Virtual Neighbor Virtual Neighbor State
2.2.2.2
Description
The non-backbone area the two endpoints of virtual neighbor have
in common.
Router ID of the other endpoint of the virtual neighbor.
IP address of the other endpoint of the virtual neighbor.
State machine of adjacency.
IP Address of
100.1.1.1
show ip ospf virtual-neighbor
Virtual Neighbor
Full
365