Show Arp - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

1-6 show arp

show arp [vrf <string 1-12>] [ip-address [net-mask] | mac-address | {static | complete}]
Syntax Description
vrf <string 1-12>
ip-address
net-mask
mac-address
static
complete
Default
Command Mode
Usage Guideline
Example
Switch# show arp
ARP timeout is 20 minutes.
Interface
-------------
System
System
System
System
System
System
Total Entries: 6
CLI Reference Guide
Use this command to show the Address Resolution Protocol (ARP) cache table.
Specifies the VRF that the IP resides in. If no VRF name is specified, the global
instance will be used.
(Optional) Show the ARP entry of the specified IP address.
(Optional) Show the ARP entries of the network segment included within the
mask.
(Optional) Show the ARP entry of the specified MAC address
(Optional) Specify to show all the static ARP entries.
(Optional) Specify to show all the resolved dynamic ARP entries.
All entries in the ARP cache table will be displayed if no option is specified.
User mode or Privileged mode.
Use this command to display the ARP cache table. Static and complete is
mutually exclusive with each other.
IP Address
----------------
10.0.0.0
10.90.90.90
10.1.1.5
10.1.1.8
10.1.1.9
10.255.255.255
MAC Address
------------------
FF-FF-FF-FF-FF-FF
00-12-21-12-21-11
00-12-21-12-21-18
00-12-21-12-21-48
00-05-5D-A5-32-3F
FF-FF-FF-FF-FF-FF
Type
---------------
Local/Broadcast
Local
Static
Static
Dynamic
Local/Broadcast
show arp
7