Show Ip Bgp Neighbors - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

2-100 show ip bgp neighbors

show ip bgp neighbors [{[vrf VRF-NAME] [IP-ADDRESS [{advertised-routes | received prefix-
filter | received-routes | routes | statistics}]] | all}]
Syntax Description
vrf VRF-NAME
IP-ADDRESS
advertised-routes
received prefix-filter
received-routes
routes
statistics
all
Default
Command Mode
Usage Guideline
Example
CLI Reference Guide
Use this command to display information of the BGP neighbors.
(Optional) Specifies a VRF name. The length of the VRF-NAME is 12 characters.
(Optional) IP address of a neighbor. If this argument is omitted, all neighbors are
displayed.
(Optional) Displays the routes advertised to a BGP neighbor.
(Optional) Displays the prefix-list received from the specified neighbor.
(Optional) Displays the received routes from neighbor. To display all the received
routes from the neighbor, configure the BGP soft reconfigure first.
(Optional) Displays all accepted routes learned from neighbors.
(Optional) Displays the statistical information of BGP speaker.
(Optional) Displays information of all BGP neighbors.
None
Privileged mode
Use this command to display the information of the neighbor. The information may be
the dynamic parameters configured to the neighbor, routers received from or sent to
the neighbor, ORF filter received from the neighbor and the statistics information
about the neighbor.
This example shows how to display all the neighbors.
show ip bgp neighbors
167