Retard And Registration; Registration Chute (Pl4.1.5) - Xerox Phaser 6300 Service Manual

Retard and Registration

Caution
After removal of the Imaging Unit, protect the Developer Assemblies by
covering the rollers with a sheet of paper or other similar technique.

Registration Chute (PL4.1.5)

1.
Open Door A.
2.
Remove the Imaging Unit.
3. Remove the Registration Roller Assembly (page 8-38).
4. Release the sensor wiring from the bottom harness guides.
5.
Remove the connector (P/J181) of Registration Sensor on the Registration Chute.
6.
Lift the rear part of Registration Chute and pull it out rearward to remove.
8-34 Phaser 6300/6350 Color Laser Printer Service Manual
s6300-156