Xerox Phaser 6300 Service Manual page 333

Color laser printer

Hide thumbs Also See for Phaser 6300:

Table of Contents

Remove 2 E-rings that secure the Right and Left Pivot Shafts from the underside

of Chute Assembly Out.

Close Door A if open.

Holding the Chute Assembly Out, push the Right and Left Pivot Shafts in by

approximately half their length.

Replacement Note

Install the shorter of the two pivot pins into the left side of the printer.

Phaser 6300/6350 Color Laser Printer Service Manual

Troubleshooting