OPTPLG 2 Harness (PL11.1.13)
1.
Remove the 550-Sheet Feeder (page 8-134).
2.
Remove the Right Cover (page 8-135).
3.
Remove the screw (metal, 6 mm) in the Connector Plate and the screw (self-
tapping, plastic 8 mm) in the OPTFDR 1 Board.
4.
Remove the assembly from the Feeder.
5.
Remove the OPTPLG 2 Harness connector (P/J84) from OPTFDR 1 Board.
6.
Release the hooks, at two positions, securing the option plug to the frame.
Service Parts Disassembly
Connector Plate
OPTPLG 2 Harness
OPTFDR 1 Board
s6300-229
8-139