No Toner Sensor (K) (Pl7.2.5) - Xerox Phaser 6300 Service Manual

No Toner Sensor (K) (PL7.2.5)

1.
Remove the Top Main Cover (page 8-8).
2.
Remove the Right Side Cover (page 8-12).
3. Remove the Left Side Cover (page 8-13).
4. Remove the Rear Cover (page 8-16).
5. Unplug connector (P/J704) from the No Toner Sensor.
6.
Spread the 4 hooks on the Toner Cartridge Holder that secure the sensor.
7. Remove the No Toner Sensor from the Toner Cartridge Holder.
8-88 Phaser 6300/6350 Color Laser Printer Service Manual
P/J704
No Toner Sensor (K)
s6300-206