Xerox Phaser 6300 Service Manual page 395

4. Disconnect the connector (P/J81) from the lower Circuit Board HCF, and remove
the harness from clamp.
5. Disconnect the No Paper Sensor connector (P/J822) on Paper Pick Assembly
HCF T2.
6. Disconnect the Feed Solenoid connector (P/J824) and remove the harness from
the clamp.
7.
Disconnect the Turn Roller Clutch connector (P/J825) and remove the harness
from the clamp.
8-126
P/J822
P/J825
Phaser 6300/6350 Color Laser Printer Service Manual
P/J824
P/J81
s6300-274