600 Cfi Fuel Tank / Fuel Supply; 600 Cfi Pump / Sender Specifications; 600 Cfi Fuel Pump Replacement - Polaris 2007 Two Stroke Service Manual

600 CFI Fuel Tank / Fuel Supply

RETURN HOSE

600 CFI Pump / Sender Specifications

Ω
P
INS
≤
Full 1
8 ±1
1/2 40 +/-3 2
Empty 85 +/- 4 3
4
SUPPLY HOSE
FUEL FILTER
(ARROWS POINTS TO THROTTLE BODY)
FUEL RAIL
TPS (PTO SIDE)
C F
OLOR UNCTION
Red Pump PWR
WHT/BLU Sender
Black Ground
Pink/Black
Sender

600 CFI Fuel Pump Replacement

WARNING
Only the 2007 600 CFI models use the drop-in style fuel
pump.
1. Siphon the fuel out of the fuel tank into a suitable
container.
2. Remove the console and the seat assembly.
3. Disconnect the positive (+) battery cable from the battery
if applicable.
4. Remove the fasteners securing the fuel tank to the tunnel.
5. Bleed the pressure from the fuel rail. See "Fuel Rail
Bleeding" on page 4.20.
6. Lift and move the tank back to gain access to the fuel lines.
7. Remove the fuel supply and return hoses from the top of
the tank.
8. Disconnect the wiring harness, then remove the tank from
the snowmobile. Place tank in a well-ventilated area.
FUEL DELIVERY
FOAM PAD
4.21
4