Setting The Binding Margin - Konica Minolta bizhub C650 Print Operations

Setting up the PCL driver (Windows)

Setting the binding margin

Binding margins are added to the document before it is printed.
1
Click the Layout tab.
2
From the "Binding Direction" drop-down list, select the binding position.
3
Select the "Binding Margin" check box.
4
To set the width of the binding margin, click the [Binding Margin Settings] button, and then specify the
desired settings in the Binding Margin Settings dialog box that appears.
– Shift Mode: To add a binding margin, select how the image is to be shifted.
– Front Side/Back Side: Sets the binding margin values. By clearing the "Same value for front and
back sides" check box, you can specify separate values for the front and back sides.
– Unit: Selects the measurement unit that specifies the size.
bizhub C650/C550/C451 (FE3)
6
6-13