Specifying Duplex/Booklet Printing; Setting The Binding Margin - Konica Minolta bizhub C650 User Manual

Setting up the PCL driver (Windows)
Note
When entering multiple page numbers, separate the page numbers with commas such as "2, 4, 6" or
enter a page range using a hyphen such as "6-10".
The "Chapters" check box can only be selected when the duplex printing or the booklet printing setting
is enabled.

Specifying duplex/booklet printing

You can print a document onto both sides of a page or in a booklet format (two facing pages). This comes in
handy when you want to bind multiple-page documents.
1
Click the Layout tab.
2
From the "Print Type" drop-down list, select "2-Sided" or "Booklet".
Note
The binding position can be specified from the "Binding Position" drop-down list.

Setting the binding margin

Binding margins are added to the document before it is printed.
1
Click the Layout tab.
2
From the "Binding Position" drop-down list, select the binding position.
3
Select the "Binding Margin" check box.
4
To set the width of the binding margin, click the [Binding Margin Settings] button, and then specify the
desired settings in the Binding Margin Settings dialog box that appears.
– Shift Mode: To add a binding margin, select how the image is to be shifted.
– Front Side/Back Side: Sets the binding margin values. By clearing the "Same value for front and
back sides" check box, you can specify separate values for the front and back sides.
– Unit: Selects the measurement unit that specifies the size.
C650
5
5-10