Konica Minolta bizhub C650 Print Operations page 84

4
6
Touch [Close].
7
In the NetWare Settings screen, touch [User Authentication Setting (NDS)], and then specify settings for
the following. After specifying the settings, touch [Close].
– User Authentication Setting (NDS): Select [ON]. (Depending on the network environment, select
[OFF].)
8
In the NetWare Settings screen, touch [Close].
9
Restart this machine (turn the main power off, then on again).
10
Use the NetWare server console to load PSERVER.NLM.
11
Use the NetWare server console to display the print server screen, and then check that
"C650"/"C550"/"C451" (created printer) is shown as "Waiting for Job" for the connected printer (0).
Reminder
When turning the power off, then on again, wait at least 10 seconds before turning the power on again;
otherwise, this machine may not function properly.
4-26
Setting up network printing
bizhub C650/C550/C451 (FE3)