Specifying The Paper Tray; Starting Up A Software Tool - Konica Minolta bizhub C650 Print Operations

6

Specifying the paper tray

You can register the paper size, paper orientation, and paper type for the paper that is loaded in a paper tray.
Reminder
If the paper loaded in this machine and the paper specified from the printer driver are different, printing
cannot be performed correctly. Be sure to make the proper settings.
1
Click the Configure tab.
2
Click the [Paper Tray Settings] button.
The Paper Tray Settings dialog box appears.
3
Select the desired tray in "Paper Tray Information", and then specify the paper size, paper orientation,
and paper type.
4
Click the [OK] button.
Note
The paper type for a paper tray can also be specified from the Basic tab. For details, refer to "Specifying
the basic tab settings" on page 6-7.
Specify "Duplex Side 2" to print on the back side of a page.

Starting up a software tool

You can start up tools such as PageScope Web Connection that can be used by this machine.
1
Click the Configure tab.
2
From the "Software Tools" drop-down list, select the function.
3
Click the [Start] button.
6-34
Setting up the PCL driver (Windows)
bizhub C650/C550/C451 (FE3)