Specifying The Basic Tab Settings; Printing To Suit The Paper Size - Konica Minolta bizhub C650 Print Operations

Setting up the PCL driver (Windows)
6.2

Specifying the basic tab settings

Printing to suit the paper size

You can enlarge or reduce documents created when printing to match the output paper size.
1
Click the Basic tab.
2
From the "Original Size" and "Paper Size" drop-down lists, select the desired settings.
– You can also specify any enlargement or reduction ratio in the "Zoom" box.
Note
"12 e 18" paper size is one size larger than A3 paper size at 504.8 e 457.2 mm.
To print data of the size as large as the standard size, by selecting "W" for each standard size paper for
"Original Size", the data can be centered and printed on papers larger than the original size.
For example, if you want to center and print 8-1/2 e 11 size data on 11 e 17 size paper, create data in
the size of "8-1/2 e 11W", and then specify "8-1/2 e 11W" for "Original Size" and specify "Paper Tray"
as the tray to be used with the printer driver.
On the machine side, load 11 e 17 size paper into the tray to be used, select the tray in [Basic screen
(Paper)], select [Change Tray Setting] - [Wide Paper] on the control panel, specify "8-1/2 e 11W", and
then check that [Auto Detect] is selected in [Custom Size] and "11 e 17" is displayed.
When 12-1/4 e 18 size papers have been loaded, [12-1/4 e 18] must be selected in [Custom Size].
To print on a custom size, use the bypass tray, select [Change Tray Settings] - [Wide Paper], select
"8-1/2 e 11W", and then select the paper size to use from [Change Size].
For details on the paper size that can be loaded into the tray, refer to the User manual – Copy
Operations.
bizhub C650/C550/C451 (FE3)
6
6-7