Setting A Binding Margin - Konica Minolta bizhub 215 User Manual

5.9 Making copies with a binding margin
5.9.2

Setting a binding margin

1
Load the original.
% For details on how to load the original, refer to page 3-11.
2
Press Function.
The copy function screen appears.
3
Use +, to select [PAGE MARGIN], then press OK.
4
Use +, to select [ON], then press OK.
% When you select [ON] and press ), you can specify the binding margin width. You can set the bind-
ing margin width within the range from 0 mm to 20 mm in steps of 1 mm. Press OK.
5
Press Back to return to the basic screen.
is displayed in the basic screen.
6
Configure other desired settings.
% For details on the basic functions, refer to page 4-2.
% For details on the Application, refer to page 5-2.
7
Use the Keypad to specify the number of copies, then press Start.
Tips
- The binding margin setting and the ID copy setting or the 2 in 1/4 in 1 copy setting cannot be set at the
same time.
bizhub 215
5
5-17