Unable To Specify Desired Settings Or Unable To Print As Specified - Konica Minolta bizhub C650 Print Operations

13
13.2

Unable to specify desired settings or unable to print as specified

Perform these troubleshooting procedures if you cannot specify the desired settings in the printer driver, or
if the print results do not represent the settings that have been specified.
Note
Some of the printer driver functions cannot be combined with other functions.
Symptom
A printer driver setting can-
not be selected.
The "Conflicts" message
with "Unable to Select" or
"Function Canceled" ap-
pears.
Printing is not performed
as specified.
The watermark cannot be
printed.
The staple function cannot
be specified.
Stapling cannot be per-
formed.
The stapling position is not
as expected.
The hole punch function
cannot be specified.
The pages are not
punched.
The hole punch position is
not as expected.
The overlay is not printed
properly.
The image is not printed
properly.
Paper is not fed from the
specified paper source.
13-4
Probable cause
Some functions cannot be combined.
An incorrect combination of functions has
been specified.
Incorrect settings are specified.
A combination of functions, although
possible in the printer driver, is not possi-
ble with this machine.
The paper size, orientation, and other set-
tings specified in the application have pri-
ority over those specified in the printer
driver.
The watermark is not correctly set.
The watermark density is set to a level
that is too low.
Watermarks cannot be printed in graph-
ics applications.
Stapling is not possible if "Paper Type" is
set to "Thick" or "Transparency".
The staple function requires optional fin-
isher.
If are a large number of pages to be print-
ed, stapling cannot be performed.
Stapling is not possible if the document
contains pages of different sizes.
The orientation setting is not correct.
Hole punching cannot be specified if
"Booklet", "Transparency", "Thick2",
"Thick3", or "Envelope" is selected.
Optional finishers and punch kit are re-
quired.
Printed pages may be fed out without be-
ing punched if the paper is loaded into the
paper source with an incorrect orienta-
tion.
The orientation setting is not correct.
Available computer memory space is not
sufficient.
Available computer memory space is not
sufficient.
Paper will not be fed from the specified
paper source if that paper source is load-
ed with paper of a different size or orien-
tation.
Troubleshooting
Action
Do not try to select settings that are not
available.
Check the settings and specify the func-
tions correctly.
Check each setting in the printer driver.
Enter the correct settings in the applica-
tion.
Check the watermark settings.
Check the density settings.
No watermark can be printed in this case.
Check each setting in the printer driver.
Install the required optional finisher and
enable it using the printer driver.
Change the number of pages to be print-
ed.
Check the document.
Check the stapling position in the printer
driver setup dialog box.
Check each setting in the printer driver.
Install the required optional finisher and
enable it using the printer driver.
Check the orientation setting.
Check the punch position in the printer
driver setup dialog box.
Simplify the overlay to reduce the data
size.
Simplify the image to reduce the data
size.
Load the paper source with paper of the
appropriate size and orientation.
bizhub C650/C550/C451 (FE3)