For Mac Os X; For Mac Os 9.2 - Konica Minolta bizhub C650 Print Operations

Installing the printer driver

For Mac OS 9.2

After connecting this machine, it can be used as a printer by selecting "PostScript printer" under "Chooser"
and by specifying the printer description (PPD) File.
First, copy the printer description (PPD) file onto the Macintosh computer.
1
Insert the printer driver DVD into the computer's DVD drive.
2
Open the desired folder on the DVD that contains the printer driver. Select the specified folder
according to the printer driver to be used, the operating system, and the language.
3
Select PPD file "KONICAMINOLTAC650UVxxx.ppd", and then copy it into the "Printer Descriptions"
folder in "System Folder" – "Extensions" of "Hard Disk".
Next, select a printer.
The printer driver can use a standard Macintosh LaserWriter.
4
On the Apple menu, click "Chooser".
5
Make sure that "AppleTalk" is set to "Active", and then click the [LaserWriter] icon.
6
From the "Select a PostScript Printer" list, click the applicable printer for the printing system, and then
click the [Create] button.
– If a different PPD file has already been selected, click the [Setup] button in step 6, and then click the
[Select PPD] button from the screen that is already displayed.
The PostScript printer description (PPD) file selection screen appears.
7
Select the applicable PPD file, and then click the [Select] button or [Open] button.
The setting screen for adding options appears.
8
Select the options that are installed on this machine.
9
Click the [OK] button.
The Chooser window appears again.
10
Close the Chooser window.
bizhub C650/C550/C451 (FE3)
3
3-17