Specifying The Finish Tab Settings - Konica Minolta bizhub C650 Print Operations

Setting up the PostScript driver (Windows)
7.4

Specifying the finish tab settings

Stapling
Multiple-page documents can be stapled.
Reminder
The staple function is available only when the optional finisher is installed.
1
Click the Finish tab.
2
Select the "Staple" check box.
3
From the drop-down list, specify the number of staples and the stapling position.
Note
Specify the staple position noting the binding position specified in "Binding Direction".
Specifying the saddle stitch setting
You can specify to saddle stitch a printed document. By specifying the saddle stitch setting, printed
documents can be folded in half and stapled.
Note
The saddle stitch function is available only when the optional finisher or saddle stitcher is installed.
1
Click the Finish tab.
2
Select the "Saddle Stitch" check box.
Note
The saddle stitch function cannot be specified when the staple, punch, or fold function is specified.
The saddle stitch function and the thick paper function cannot be specified when finisher FS-608 is
installed.
bizhub C650/C550/C451 (FE3)
7
7-17