Service Diagnostics Tests - Xerox Phaser 7400 Service Manual

Service Diagnostics Tests

Service Diagnostics Tests and Utilities
Menu Item
Print Service Menu Map - Prints the service diagnostics menu map, exits diagnostics, runs
POST and returns printer to Ready.
General Status - Displays user-selected engine information.
Engine Status
Jam Status
Engine Board
ROM Version
Printer
Configuration
Ambient Temp/
Humidity
Fuser
Temperature
Reference
Front Panel Display Results
<No Status to Report>
<Error Message>
NOTE: Generally, staus does not
update while in test printing
mode. Do not assume that it
does.
<No Jams >
<Jam @>
<Jam2 @>
Engine Version is n.n.n
Duplex Version is n.n.n
Tray 3 Version is n.n.n
Tray 4 Version is n.n.n
Tray 5 Version is n.n.n
Tray 6 Version is n.n.n
Sub-CPU Version is n.n.n
Tray 2 Version is n.n.n
Finisher Version is n.n.n
Inverster Version is n.n.n
Loader Version is n.n.n
Installed Memory is: nnnMB
Hard Drive is Present/Absent
Duplex is Present/Absent
Tray 1-n Installed
Amb. Temp. is nnn deg.C (Celsius)
Amb. Hum. is nnn % (relative percent)
Fuser Temp Upper is nnn deg.C
Fuser Temp Lower is nnn deg.C
Removed
Functional Definition
No Status to Report = The printer
is online and ready to print.
Error Message = Displays an error
message that prevents printing.
Status is displayed sequentially,
one line at a time.
Status is scrollable using the Up
Arrow or Down Arrown buttons.
Jam @ indicates the first jam
location. Jam2 @ secondary jam
location(s). Clear all jams.
Displays the firmware version of
the engine and installed optionals.
Otherwise a _* is displayed to
indicate an incorrect version.
<press Back or Cancel to abort>
Displays installed memory.
Detects the Hard Drive.
Detects the Duplex Unit.
Detects the installed Trays.
<press Back or Cancel to abort>
Displays the current Temperature
and Humidity for the printer.
<press Back or Cancel to abort>
Displays reported fuser
temperatures in degrees Celsius.
<press Back or Cancel to abort>
A-13