Top Cover Fan - Xerox Phaser 7400 Service Manual

Top Cover Fan

The Top Cover Fan is mounted in a duct located underneath the Cyan LED Head.
1.
Remove the Job Offset Assembly (page 8-56).
2.
Remove the JOFMOT harness from the Upper Fuser Fan Duct and Top Output
Chute.
3.
Release the 4 hooks that secure the Top Output Chute to remove it from the LED
Assembly.
4. Release the Top Cover Fan wiring (Red, Black and White) from the guides in the
LED Relay Board cover.
5.
Release the 1 hook at the back, and 2 tabs at the front that secure the Top Cover
Fan Duct to the LED Assembly.
Service Parts Disassembly
Job Offset Motor Harness
s7400-584
8-135