Finisher Inverter Flash Memory Failure - Xerox Phaser 7400 Service Manual

Finisher Inverter Flash Memory Failure

Applicable Status Code:
Code 225:
Hardware failure with Inverter Flash Memory.
Initial Actions:
Cycle the printer's power.
If the problem persists follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Inverter Control Board
Troubleshooting Procedure Table
Step Actions and Questions
1
Check the following for evidence of fault or
damage:
Inverter Control Board
Inverter Interface Cable
Inverter connections
Is there any damage?
2 Check the Inverter connection.
Is the Inverter interface cable securely
connected at both ends?
3 Check the connections at the Inverter
Control Board.
Are the connections secure?
3-158
Wiring and Plug/Jack References
Options Map 3 Inverter Controller Board
Yes
Replace any
damaged parts.
Go to Step 3.
Replace the Inverter
Control Board.
Phaser 7400 Color Printer Service Manual
No
Go to Step 2.
Connect the
Inverter to the
Finisher.
Reconnect the
connectors.