Unsupported Tray 2 Rom - Xerox Phaser 7400 Service Manual

Unsupported Tray 2 ROM

The firmware version of the Tray 2 Feeder Board is unsupported by the Engine
Control Board.
Applicable Status Code:
Code 39: Unsupported Tray 2 ROM
Initial Actions:
Cycle the printer's power.
If the problem persists follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Feeder Board, PL4.2.97
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the Feeder Board version using the
Service Diagnostics General Status menu.
Is the version current?
Error Messages and Codes
Wiring and Plug/Jack References
Print Engine Map 12 (page 10-15)
Print Engine Feeder Board (page 10-28)
Yes
Replace the Engine
Control Board
(page 8-112)
No
Replace the
Feeder Board
(page 8-53).
3-115