ADC Sensor
Note
The Registration Shutter return spring is not captive to the shutter. Note the
position of the spring before disassembly.
1.
Remove the Registration Sensor Assembly (page 8-80).
2.
Turn the assembly over and release the 3 bosses that retain the Registration
Shutter in the assembly.
3.
Remove the 1 (metal, 6 mm) screw that secures the ADC Sensor to the assembly.
4.
Slide the sensor to the left to release the sensor from the assembly.
5.
Disconnect the ADC Sensor connector (P/J192), and then remove the ADC
Sensor.
Registration Sensor Assembly
8-82
ADC Sensor
Phaser 7400 Color Printer Service Manual
s7400-589