Samsung OfficeServ 7200 Technical Manual page 38

Load and Upgrade Set/Modify
The third item [3. Load & Upgrade] sets or modifies the IP phone's software ver-
sion. Use extreme caution when upgrading the keyset.
Select the [3. Load & Upgrade] item and move to the lower level. The screen
below is displayed.
1.Load Option
2.Upgrade Program
Item not visible in the first screen:
3.Upgrade Bootrom
4.Format
In the [1.Load Option] item, move to the lower level and select [2. File System].
Each of the items [2. Upgrade Program] and [3. Upgrade Bootrom] are used for
upgrading program and bootrom. Set the IP of the TFTP server you wish to
upgrade and press OK.
The [4. Format] item is used for deleting all programs and data except bootrom.
CAUTION: For engineering purposes only. The format option should not be used
unless instructed by an Authorized Samsung Engineering or Technical Support
Representative.
14
Home Page
Authentication Server Related Set/Modify
The fifth item [5. Server] sets or modifies settings related to the authentication
server. Select the [5. Server] item and move to the lower level. The screen below is
displayed.
1.Server IP
You can set/modify the IP address of the authentication server at the [1. Server IP]
item. The screen below is displayed when you enter the item. The server IP is the
IP address of the MCP2.
Input ServerIP
xxx.xxx.xxx.xxx
You can confirm the current IP address of the authentication server at the LCD
panel.The address is left blank if it is not set. Use the dial buttons from [0]-[9], and
[ ] to set the IP address and press the [ENTER] button among the navigation but-
tons to save and exit.
Input Id
xxxx
You must input the ID assigned to your ITP phone. See your phone system admin-
istrator to get this value. Press the [ENTER] button to save and exit.
Input Password
xxxx
You must input the password associated with your ID. See your phone system
administrator to get this value. Press the [ENTER] button to save and exit.
Completion of Settings
Verify settings at the first item [1. Information] after setting all of the above items.
Select the sixth item [6. Exit] to save all modified settings and reboot the ITP-
5012L phone.
ITP-5012L
Table of Contents
15