Samsung OfficeServ 7200 Technical Manual page 193

DIAL 9 W X
DIAL : =
NOTE: When the character you want appears on the same dial pad key as the
previous character, press UP to move the cursor one space to the right.
To cancel an individual alarm and reminder message:
• Press TRSF and then dial 112.
• Dial alarm number 1, 2 or 3.
• Press the HOLD key.
• Press the TRSF key.
PERSONAL SPEED DIAL NAMES
Each personal speed dial number can have an 11 character name assigned to it.
This name is used to select the speed dial bin when you are dialing by directory.
• Press TRSF and then dial 106.
• Dial the speed dial bin number 00–49.
• Write your message using the procedure described in Alarm Reminder Messag-
es.
• Press the TRSF key to store the speed dial name.
• Repeat for each speed dial bin if necessary.
STATION NAMES
You can assign an 11 character name to your keyset. This allows other display key-
set users to call you using the directory dial feature.
To program a station name:
• Press TRSF and then dial 104.
• Enter the 11 character name using the procedure described in
Messages.
• Press TRSF to store the name.
MANAGING KEY ASSIGNMENTS
You can view your key assignments and add extenders to some of your program-
mable keys for easy one touch operation of frequently used features.
• While on-hook, press TRSF and then dial 107.
• Use the VOL keys to scroll through all of your programmable keys OR press the
programmable key to which you want to add the extender.
48
Y ( 9
[ ]
Alarm Reminder
Home Page
• When you reach a key listed below, dial the corresponding extender.
• Press TRSF to store and exit programming.
KEY DESCRIPTION
BOSS ......................Boss and Secretary ..................1–4
DP ............................Direct Pickup ............................Extension or
DS ............................Direct Station ............................Any extension number
FWRD ....................Call Forwarding ......................0–7
GCONF ..................Group Conference ..................0–5
GPIK........................Group Pick-Up ..........................01–20
IG..............................In/Out of Group........................Any group number you are part of
MMPG ....................Meet Me Page ..........................0–9,
PAGE ......................Page ............................................0–9,
PARK ......................Park (orbits)................................0–9
RP ............................Ring Plan ....................................(1–6), HOLD for none
PMSG......................Programmed Messages ........01–30
SG ............................Station Group............................500 or 5000 through 549 or 5049
SPD..........................Speed Dialing ..........................00–49, 500–999
DIR ..........................Directory ....................................PERS (1), SYS (2) or STN (3)
VT ............................Voice Mail Transfer ..................Voice Mail Group number
NOTE: Confirm that the cursor is placed correctly before you enter the extender.
LCR WITH CLEAR
When you are making an outside call using LCR and dial an incorrect digit, you can
press the CLEAR soft key to reenter the telephone number. You do not need to
redial 9 to reaccess LCR.
BACKSPACE WITH LCR
If you misdial while using LCR, you can delete digits shown in the display by press-
ing the BSPC soft key as many times as necessary.
DCS Keyset
Table of Contents
EXTENDER
station group number
(501–549)
49