Customer Set Relocation - Samsung OfficeServ 7200 Technical Manual

HOLIDAY
This program provides the ability to set as many as 20 different holidays. Each hol-
iday will override the System Operating Mode for that particular date with a pro-
grammed ring plan.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
HOLD - Used to clear an entry.
ACTION
1. Press TRSF and then dial 512
Display shows
2. Press the right soft key to move the
cursor to bottom half of display
3. Enter the desired ring plan (e.g., 0-6)
Display will return to STEP 1
4. Press UP or DOWN to change display
to holiday assignment
5. Press the right soft key to move the
cursor to bottom half of display
6. Enter a desired holiday date
(e.g., 1225)
7. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
33
DISPLAY
RING PLAN
FOLLOW1
RING PLAN
FOLLOW1
RING PLAN
FOLLOW4
ASSIGN HOLIDAY
01:
ASSIGN HOLIDAY
01:
ASSIGN HOLIDAY
01:
ASSIGN HOLIDAY
01:1225
Home Page

CUSTOMER SET RELOCATION

This program is used to swap information associated with two stations. All assign-
ments such as trunk ring, station group, station COS, station speed dial etc. will fol-
low this program. 12 button keysets and 24 button keysets can be exchanged.
Basic 7 button keysets can be exchanged with Basic 7 button key sets. Single line
stations numbers can be exchanged. If incompatible set types are selected the sys-
tem will provide an ERROR: NO MATCH message. 12 button and 24 button key
assignments should be taken in consideration when relocating these type of sets.
The table below shows which phones can be switched with each other.
NOTE: In order to use this program it must first be activated by a technician. Please
see your installing company to have this done if you wish to use this program.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ANS/RLS - Used to select ALL.
ACTION
1. Press TRSF 315
Display shows
2. Enter first station number (e.g., 202)
Press RIGHT soft key to move cursor
3. Enter second station number (e.g., 210)
Press RIGHT soft key to enter data
4. Display will return to STEP 1
Go to STEP 2
OR press TRSF to store and exit
programming.
System Admin
Table of Contents
DISPLAY
SET RELOCATION
EXT _ EXT
SET RELOCATION
EXT 202 EXT _
SET RELOCATION
EXT 202 EXT 210
SET RELOCATION
EXT _ EXT
34