Removing The Main Board - JVC MX-G950V Service Manual

Joint c
Fig.16
(CA-MXG850VU, CA-MXG950VUX)

Removing the main board

Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly, the rear panel and the tuner board.
1. Disconnect the card wires from connector CN870,
CN871 and CN315 on the main board.
2. Disconnect the wires from connector CN704 and
CN706 on the amplifier board.
3. Remove the screw I attaching the main board on
the right side of the body.
4. Disconnect the wire from connector CN710 on the
speaker board.
5. Disconnect connector CN211 and CN212 on the
main board from the regulator board.
Front panel assembly
Regulator board
Rear panel
(See Fig.17 ~ 19)
Main board
CN211
I
CN212
Fig.19
Joint c
Fig.16
(CA-MXG750VUS)
Main board
CN870
CN871
CN315
Amplifier board
CN704
CN706
Fig.17
Main board
Speaker board
CN710
Fig.18
(CA-MXG850VU, CA-MXG950VUX)
Main board
Speaker board
CN710
Fig.18
(CA-MXG750VUS)
MX-G950V/MX-G880V
MX-G850V/MX-G750V
Rear panel
Front panel assembly
Amplifier board
CN704, CN706
Amplifier board
CN704, CN706
1-9