<Woofer speaker section>
Removing the front cover (See Fig.5)
CAUTION:
Do not break or damage the front panel and
body that are glued at the joints b.
1.
Remove the four screws D on the front of the body
respectively.
2.
Remove the front cover toward the front.
Removing the woofer speaker (See Fig.6)
Prior to performing the following procedure, remove
the front cover.
1.
Remove the four screws E on the front of the body.
2.
Pull out the woofer speaker toward the front and
disconnect the red and black wires from the two
speaker terminals.
(See Fig.5)
D
E
MX-G950V/MX-G880V
MX-G850V/MX-G750V
Joint b
Joint b
Joint b
Joint b
Front cover
Fig.5
(SP-MXG850V)
(SP-MXG950V)
Woofer speaker
Fig.6
(SP-MXG850V)
(SP-MXG950V)
D
E
1-17