Removing The Main Board Assembly; See Fig. - JVC DX-U10A Service Manual

3.1.8 Removing the MAIN BOARD assembly

(See Fig.17, 18)

(1) Disconnect the card wire from FL BOARD assembly con-
nected to connector CN720
bly. (See Fig.17)
(2) Disconnect the card wire from CASSETTE MECHANISM A
connected to connector
sembly. (See Fig.17)
(3) Disconnect the card wire from SUBWOOFER AMP
BOARD assembly connected to connector
MAIN BOARD assembly. (See Fig.17)
(4) Disconnect the card wire from SURROUND AMP BOARD
assembly connected to connector
BOARD assembly. (See Fig.17)
(5) Disconnect the card wire from MIC BOARD assembly con-
nected to connector CN740
bly. (See Fig.18)
(6) Remove the two screws L attaching the MAIN BOARD as-
sembly. (See Fig.18)
(7) Disconnect the BOARD TO BOARD connector
connected the MAIN BOARD assembly and REGULATOR
BOARD assembly. (See Fig.18)
1-14 (No.MB616<Rev.002>)
of the MAIN BOARD assem-
CN730 of the MAIN BOARD as-
CN820 of the
CN830 of the MAIN
of the MAIN BOARD assem-
CN850
CN730
CN720
CN820 CN830
Fig.17
CN850
L
CN740
Fig.18