Removing The Fan; Removing The Front Panel Assembly - JVC MX-G950V Service Manual

Removing the fan

Prior to performing the following procedure, remove
the metal cover and the CD changer mechanism
assembly.
1. Turn over the CD changer mechanism assembly and
remove the two screws E attaching the fan.

Removing the front panel assembly

Prior to performing the following procedure, remove
the metal cover and CD changer mechanism
assembly.
1. Disconnect the card wires from connector CN870,
CN871 and CN315 on the main board respectively.
2. Remove the band and disconnect the wire from
connector CN703 on the amplifier board.
3. Disconnect the wire from connector CN220 on the
transformer board.
4. Remove the two screws F
body.
5. Release the two joints a on the lower right and left
sides of the body using a screwdriver, and remove
the front panel assembly toward the front.
Front panel assembly
(See Fig.7)
(See Fig.8 ~ 11)
on the bottom of the
Joint a
Fig.10
E
CD changer mechanism assembly
Fig.7
Band
Amplifier board
CN703
Transformer board
CN220
Fig.8
(Bottom)
Fig.9
Joint a
Front panel assembly
Fig.11
MX-G950V/MX-G880V
MX-G850V/MX-G750V
Fan
E
Main board
CN870
CN871
CN315
Front panel
assembly
F
1-7