Disassembly method
<speaker section>
Removing the front cover (See Fig.1,2)
CAUTION:
Do not break or damage the front panel and
body that are glued at the joints a.
1.
Remove the four screws A on the front of the body
respectively.
2.
Remove the front cover toward the front and
disconnect the yellow and black wires from the two
tweeter speaker terminals.
(See Fig.1)
A
Woofer speaker
MX-G950V/MX-G880V
MX-G850V/MX-G750V
Joint a
Joint a
Joint a
Joint a
Front cover
Fig.1
(SP-MXG750V)
(SP-MXG850V)
(SP-MXG950V)
Tweeter speaker
Fig.2
(SP-MXG750V)
(SP-MXG850V)
(SP-MXG950V)
A
1-15