Front Panel Assembly; Removing The Display System Control Board; Removing The Cd Eject Board - JVC MX-G950V Service Manual

<Front panel assembly>
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly and the front panel assembly.
Removing the
assembly
1. Disconnect the card wire from connector CN306 on
the head amplifier & mechanism control board.
2. Remove the seven screws N attaching the cassette
mechanism assembly.
Removing the display system control
board
1. Remove the four screws O
bracket.
2. Disconnect the card wires from connector CN316
and CN880 on the display system control board.
3. Remove the seven screws P attaching the display
system control board.
4. If necessary, disconnect the wire from connector
CN911 on the front side of the display system control
board and unsolder FW915.

Removing the CD eject board

1. Remove the three screws Q attaching the CD eject
board.
2. If necessary, unsolder FW915 on the CD eject
board.
CN911
Display system control board
cassette mechanism
(See Fig.28)
(See Fig.29 ~ 31)
attaching the stay
(See Fig.31, 32)
CD eject board
FW915
FW915
Fig.31
Head amplifier
& mechanismcontrol board
CN306
N
Cassette mechanism
assembly
Fig.28
Display system control board
Fig.29
P
CN316
P
FW915
(Solding)
P
CN880
Fig.30
Q
CD eject board
FW915
(Solding)
Q
Fig.32
MX-G950V/MX-G880V
MX-G850V/MX-G750V
N
N
N
O
Stay bracket
CN911
P
P
Display system control board
1-13